The issue of a significant level of water pollution from the tap, which every inhabitant comes into contact with daily, is gaining momentum. And this is understandable, because more and more experts point to poor-quality water as the cause of most serious diseases.

But how to determine that the water received from the tap is really dangerous, and by what methods can you correct this situation and protect yourself and your family from undesirable consequences? You can use some of the recommendations below.

Water contains a certain set of chemicals, which is quite common. But, in addition to this, there is also a constant high risk of ingestion of dangerous microorganisms, the habitat of which is water supplied to homes.

The whole danger of tap water is that its effect is slow. So, the use of water saturated with chemicals does not immediately cause the manifestation of symptoms of poisoning of the body. This process develops after some time. Of course, one cup of tea will not do any harm, but the processes of regular daily tea drinking using low-quality water provoke decomposition of the body from the inside. The poisoning process is slow and gradual. The first blow falls on the kidneys, then the destruction of red blood cells in the blood begins, and there is also damage to the brain and heart.

Most people tend to think that the process of boiling water contributes to its purification - this is a big mistake. In fact, exposure to water at high temperatures does not contribute to the disappearance of viruses and chemical poisons from it. And even vice versa - in many cases, one can also find the negative effect of boiling on water quality, which is simply impossible to predict.

What to do in cases of dirty water from a tap?

First of all, you should not forget about your rights, because the payment should be received clean drinking water, not a liquid, in which you can find all the elements of the famous periodic table. In this case, it is advisable to require a recalculation, but the likelihood that some payment will be made or the cost of water will be reduced is extremely low. Therefore, water purification as a guarantee of creating safe conditions for health rests entirely on the shoulders of its consumers.

Signs of contaminated water

So what should you look for?

• Drops of a brownish or green tint occur on washed dishes. This can occur under the influence of acids such as sulfuric and hydrochloric, which are present in the liquid used in significant volumes.
• Water smells unpleasant, resembling the smell of earth, wood or fish. This is provoked by the presence of organic compounds in the water used.
• Dark plaque forms on silver dishes, and black spots appear on sinks. This is caused by hydrogen sulfide present in water.
• Washing dishes made of aluminum is accompanied by a foaming process. This indicates that the liquid is filled with alkali, the concentration of which is quite high.
• Water is distinguished by the taste of metal. This indicates the saturation of water with iron in large quantities.
• When the tap is opened, water has a brownish or reddish hue. This says that the liquid in the pipeline undergoes oxidation processes under the influence of iron.

The reason for poor-quality water with obvious signs of turbidity and pollution is that it is filled with methane or air.

Ways to clean dirty water

The liquid from the water supply must settle. This will contribute to the precipitation of many harmful microorganisms and substances. For this purpose, and the liquid intended for use in aquariums or watering flowers, contain in a special container. After settling for 24 hours, the water must be filtered through carefully selected filters. It is better to give preference to filters containing inserts made of silicon and activated carbon, as they are popular due to their efficiency and effectiveness in cleaning processes. All harmful impurities and elements contained in water are absorbed by filtration components.

It is not surprising that silicon has been used since ancient times in the construction of wells and other structures under water. People have long used silicon as a natural cleaner, placing it in special containers designed for water.

Today, there is a large selection of specially designed water purifiers, which are also based on silicon. The purification process consists in adding this drug to water in the quantities indicated in the attached instructions. After that, the water settles for several hours and is carefully drained so that the sediment remains in the tank. The result is not only purified, but also healthy healing water.

How to determine if tap water is safe - interesting video